Industrial Low Temperature Ball Valve

Industrial Low Temperature Ball Valve

1. Pressure rating: 150LB、300LB、600LB、900LB.
2. Nominal diameter: 15-1200 mm (1 / 2-36 ").
3. Connection type: flange type, welding type, thread etc.
4. Valve material: LCB, LC3, CF8,CF8M,CF3,CF3M.
5. Applicable media: liquefied natural gas, ethylene, propylene, etc.
6. Driving mode: manual, bevel gear drive, electric.

Product Details

The pretty loaded projects management experiences and one to a person support model make the high importance of business enterprise communication and our easy understanding of your expectations for butterfly valve for Chemical industry, solenoid butterfly valve, ball valve with locking. We are continuously making progress to influence the development of the industry, hoping become an outstanding enterprise. We have always insisted on taking science and technology as the forerunner, and professionalism as the driving force. They're durable modeling and promoting effectively all over the world. So you should feel free to contact us for inquiries.

【Product Introduction】

The Cryogenic Ball valve suitable for medium temperature of - 40 ℃ ~ - 196 ℃。This ball valve adopts strict manufacturing process and special equipment to carry out strict quality control on the processing of parts. After special low-temperature treatment, the rough machined parts are placed in the cooling medium for several hours (2-6 hours) to release the stress, ensure the low-temperature performance of the material, and ensure the finishing size, so as to prevent the leakage caused by the deformation caused by the temperature change when the valve is in low-temperature condition.


Valve Features

Type : Trunnion Ball Valve

Connecting : Flanged end , RF

A182 F316 Forged steel

Full bore, 3piece body construct

Extended Stem design

Drive : Pneumatic actuator

Suitable Temperature : -29°C ~ -65°C

Suitable Presure: 2.0Mpa/150LB

For tight shut off

Standard : API6D, API608

Packing: Plywooden case

Certificate : EN 3.1 certificate


cryogenic-ball-valve06331319433微信图片_20191206131653


Cryogenic Treatment Way

The cryogenic treatment of cryogenic ball valves shall be applied to the main components of any cryogenic valves at -101 ° C and below, or as required by the technical agreement.And improve the reliability of the valve under low temperature conditions;

1、Before the roughing is completed, "cryogenic treatment" is carried out in a low temperature liquid nitrogen tank that is 100% immersed in -196 °C. 

2、Immerse the parts in a liquid nitrogen tank for adequate cooling. 

3、When the part temperature reaches -196 ° C, keep the temperature for 1-2 hours (or according to the requirements of the corresponding technical agreement), then remove the box and naturally heat to room temperature.

4、The purpose of "cryogenic treatment" is to eliminate the martensite transformation of the Cryogenic Ball Valve material and the sufficient shrinkage deformation of the material at ultra-low temperatures.

5、Thereby eliminating the potential hazards affecting the dimensional accuracy of the cryogenic valve seal. 


Our company adheres to the principle of being a down-to-earth person and doing things seriously. We devote ourselves to the research and development and production of Industrial Low Temperature Ball Valve and take the first-class products as the cornerstone to prove our strength. In order to better adapt to the development of diversified enterprises, our company has formulated a series of measures to improve the development model, organizational structure, and corporate governance. At the same time, with a good service system, the enterprise has done the pre-sale and after-sale service work steadily, so that customers can rest assured and be free from worry.

Inquiry

You Might Also Like