Russia Low Temperature Cast Steel Pn16 Pn25 Pn40 Rising Stem Flange GOST Gate Valve Electric Actuator Globe Valve Ball Valve Sluice Valve

Russia Low Temperature Cast Steel Pn16 Pn25 Pn40 Rising Stem Flange GOST Gate Valve Electric Actuator Globe Valve Ball Valve Sluice Valve

1. Pressure rating: 150LB、300LB、600LB、900LB.
2. Nominal diameter: 15-1200 mm (1 / 2-36 ").
3. Connection type: flange type, welding type, thread etc.
4. Valve material: LCB, LC3, CF8,CF8M,CF3,CF3M.
5. Applicable media: liquefied natural gas, ethylene, propylene, etc.
6. Driving mode: manual, bevel gear drive, electric.

Product Details

We have established a product research and development center to lay a solid foundation for continuous improvement of steam butterfly valve, ball valve with drain port, EPDM Butterfly Valve. The product will supply to all over the world, We've got constructed strong and long co-operation relationship with an enormous quantity of companies within this business in Kenya and overseas. Our company has always adhered to the high standards of a modern enterprise, strictly regulated operations, won market recognition, and gained the trust and support of our customers.

【Product Introduction】

The Cryogenic Ball valve suitable for medium temperature of - 40 ℃ ~ - 196 ℃。This ball valve adopts strict manufacturing process and special equipment to carry out strict quality control on the processing of parts. After special low-temperature treatment, the rough machined parts are placed in the cooling medium for several hours (2-6 hours) to release the stress, ensure the low-temperature performance of the material, and ensure the finishing size, so as to prevent the leakage caused by the deformation caused by the temperature change when the valve is in low-temperature condition.


Valve Features

Type : Trunnion Ball Valve

Connecting : Flanged end , RF

A182 F316 Forged steel

Full bore, 3piece body construct

Extended Stem design

Drive : Pneumatic actuator

Suitable Temperature : -29°C ~ -65°C

Suitable Presure: 2.0Mpa/150LB

For tight shut off

Standard : API6D, API608

Packing: Plywooden case

Certificate : EN 3.1 certificate


cryogenic-ball-valve06331319433微信图片_20191206131653


Cryogenic Treatment Way

The cryogenic treatment of cryogenic ball valves shall be applied to the main components of any cryogenic valves at -101 ° C and below, or as required by the technical agreement.And improve the reliability of the valve under low temperature conditions;

1、Before the roughing is completed, "cryogenic treatment" is carried out in a low temperature liquid nitrogen tank that is 100% immersed in -196 °C. 

2、Immerse the parts in a liquid nitrogen tank for adequate cooling. 

3、When the part temperature reaches -196 ° C, keep the temperature for 1-2 hours (or according to the requirements of the corresponding technical agreement), then remove the box and naturally heat to room temperature.

4、The purpose of "cryogenic treatment" is to eliminate the martensite transformation of the Cryogenic Ball Valve material and the sufficient shrinkage deformation of the material at ultra-low temperatures.

5、Thereby eliminating the potential hazards affecting the dimensional accuracy of the cryogenic valve seal. 


We uphold a consistent level of professionalism, quality, credibility and service for Russia Low Temperature Cast Steel Pn16 Pn25 Pn40 Rising Stem Flange GOST Gate Valve Electric Actuator Globe Valve Ball Valve Sluice Valve. "The bigger the company, the greater the responsibility", we know that our company has become a social enterprise, and our development is inseparable from shareholders, customers, employees and all sectors of society. We are able to solve the problem you meet.

Inquiry

You Might Also Like